Safety Precautions - HighSecLabs SC21H-3 User Manual

Safety Precautions

Please read the following safety precautions carefully before using
the product:
• Before cleaning, disconnect the product from any electrical power
supply.
• Do not expose the product to excessive humidity or moisture.
• Do not store or use for extensive period of time in extreme thermal
conditions – it may shorten product lifetime.
• Install the product only on a clean secure surface.
• If the product is not used for a long period of time, disconnect it
from electrical power.
• If any of the following situations occurs, have the product checked
by an HSL qualified service technician:
o Liquid penetrates the product's case.
o The product is exposed to excessive moisture, water
or any other liquid.
o The product is not working well even after carefully
following the instructions in this user's manual.
o The product has been dropped or is physically
damaged.
o The product shows obvious signs of breakage or
loose internal parts.
o In case of external power supply – If power supply
overheats, is broken or damaged, or has a damaged
cable.
4
Section 4 - Operation
• The product should be stored and used only in temperature and
humidity controlled environments as defined in the product's
environmental specifications.
• Never attempt to open the product enclosure. Any attempt to open
the enclosure will permanently damage the product.
• The product contains a non-replaceable internal battery. Never
attempt to replace the battery or open the enclosure.
• This product is equipped with always-on active anti-tampering
system. Any attempt to open the product enclosure will activate the
anti-tamper triggers and render the unit inoperable and warranty
void.
2/4 Ports Secure KVM Combiner User Manual