Active Anti-Tampering System; Product Enclosure Warning Label; Equipment Requirements - HighSecLabs SC21H-3 User Manual

Active Anti-Tampering System

Product is equipped with always-on active anti-tampering system. If
mechanical intrusion is detected by this system, the Product will be
permanently disabled and all LEDs will blink continuously.
If product indicates "tampered state" (all LEDs blinking) - please call
Technical Support and avoid using that product.
HSL Tamper Evident Label
10
Section 4 - Operation

Product Enclosure Warning Label

Product has the following warning sticker placed in a prominent
location on product enclosure:

Equipment Requirements

Cables
It is highly recommended to use HSL Cable Kits for product to ensure
optimal security and performance.
One Cable Kit is required per connected computer.
Operating Systems
2/4 Ports Secure KVM Combiner User Manual