Before Installation - HighSecLabs SX22D-3 User Manual

SEC TIONS
Table of Contents
INSTAllATIoN

Before Installation

Unpacking the Product
before opening the product packaging, inspect the packaging condition to
assure that product was not damaged during delivery.
When opening the package, inspect that the product Tamper Evident labels are
intact.
Important:
1. If the unit's enclosure appears disrupted or if all channel-select lEDs flash
continuously, please remove product from service immediately and contact
HSl Technical Support at http://highseclabs.com/support/case/.
2. Do not connect product to computing devices:
a. That are TEMPEST computers;
b. That include telecommunication equipment;
c. That include frame grabber video cards
d. That include special audio processing cards.
HSL 2-Port Secure KVM Mini-Matrix
1 2
Where to locate the Product?
The enclosure of the product is designed for desktop or under the table
configurations. An optional Mount Kit is available.
Product must be located in a secure and well protected environment to prevent
potential attacker access.
Consider the following when deciding where to place product:
• Product front panel must be visible to the user at all times.
• The location of the computers in relation to the product and the length of
Warning: Avoid placing cables near fluorescent lights, air-conditioning
equipment, Rf equipment or machines that create electrical noise (e.g.,
vacuum cleaners).
3 4
available cables (typically 1.8 m)
5 6
16