Page 1
S E C U R E K V M S W I TC H E S | Q U I C K S E T U P G U I D E Models: SK21x-3 / DK22x-3 – Secure 2-Port DVI-I / HDMI / DP Video KVM Switch, PP 3.0 SX41x-3 / DX42x-3 –...
Page 3
This guide refers to the following models: SK21D-3 – Secure 2-Port DVI-I Video KVM Switch, PP 3.0 DK42D-3 – Secure 4-Port DVI-I Video DH KVM Switch, PP 3.0 SK21H-3 – Secure 2-Port 4K HDMI Video KVM Switch, PP 3.0 DK42DU-3 –...
Page 4
SEC TIONS Table of Contents InSTallaTIon Installing the KVM General • Mouse: Connect either a USb or PS/2 mouse to the corresponding KVM console mouse port. • Verify that all peripherals and computers are turned off prior to • Audio peripherals: Connect headphones / speakers to the KVM connecting them to the product.
SEC TIONS Table of Contents InSTallaTIon Step 2 – Connect computers to the KVM Computer ports: • Computer keyboard & mouse connection: Connect each Single Display computer to the KVM keyboard & mouse computer port using a USb a to USb b cable. Connect the USb a end to the computer and the USb b end to KVM.
Page 6
SEC TIONS Table of Contents InSTallaTIon Step 3 – Power ON your system: Step 4 – Reset to Factory Defaults • Power ON the monitor: Make sure that the monitor is turned on Reset to factory defaults clears the device settings and restores the prior to powering on the KVM.
Page 7
SEC TIONS Table of Contents oPERaTIon Operating the KVM • once switching between channels, for example from channel #1 Front Panel Push-Buttons to channel #3, the USb device which is connected to the fUSb port • following power up, the default channel is #1. is automatically switched accordingly.
• Multi-monitor computers require driver installation, currently available border, shared peripherals (Keyboard, audio, USb) switch to the only for Windows (http://highseclabs.com/support/downloads/?rid=19). next computer without having to press any buttons. HSL Mini-Matrix Quick Setup Guide...
SEC TIONS Table of Contents oPERaTIon Interchangeable KVM-to-KM Functionality • In KVM mode (default) one display, keyboard, mouse, USb and audio peripheral set is shared between all computers. Display Computers Audio • In KM mode each computer is connected to a separate display while keyboard and mouse are shared.
Page 10
SEC TIONS Table of Contents oPERaTIon Switch between computers in KM mode: To change from KM to KVM mode: • Press the front panel buttons to manually switch control from one • Connect a Display to the KVM Console Port. computer to another.
SEC TIONS Table of Contents oPERaTIon Keyboard shortcut options Action Description Keyboard (absolute) - L CTRL | L CTRL | F11 | c Toggle between mouse modes (Relative) - L CTRL | L CTRL | F11 | b System Reset to factory defaults L CTRL | L CTRL | F11 | r Enter Terminal-Mode L CTRL | R CTRL | t...