Advertisement
SEC TIONS
Table of Contents
INSTallaTIoN
Installing the Combiner
Step 1 – Combiner Installation
1. Verify that all peripherals and computers are turned off prior to
connecting them to the product.
2. The Combiner's back panel is divided into Console Ports and
Computer Ports sections.
3. Connect peripherals which are due to be shared by the Combiner
to the Console ports.
4. Connect each computer that requires access to the shared
peripherals to a Computer port group.
5. Make sure that every computer is connected to a separate Computer
port group.
HSL Secure 2-Port KVM Combiner Quick Setup Guide
1
2
6. Computer port group numbers are represented by push buttons on
the product's front panel.
7. Switch peripherals between computers by pressing the push
buttons on the product's front panel.
Microphone
Audio
3
Display
Keyboard
Mouse
CONSOLE PORTS
COMPUTER PORTS
Audio Cable
Mouse Cable
Display Cable
Keyboard Cable
Computers
3
Advertisement
