HighSecLabs SC21H-3 User Manual page 32

VDT KM Mode
The Virtual Desktop Technology (VDT) KM mode is a unique mode
developed by integrating HSL unique KM technology to the KVM
Combiner line. This mode allows the user to switch active windows
simply by dragging the mouse from one window to another. In this
mode the user can positions the channels windows in any way he see
fit and can switch between any adjacent windows by dragging the
mouse from one window to the other.
To enter into VDT mode use the CTRL , CTRL , F11 , v. once in VDT
mode it will remain in that mode even when switching back and
forth from System mode to User mode. To switch out of VDT mode
use the CTRL , CTRL , F11 , o key combination.
In VDT mode once two windows overlay one another switching will
be done via the boarders on the top window:
This means that it will be impossible to point to the button right
corner with the combiner mouse as long in VDT mode and without
moving the windows.
32
Section 4 - Operation
Switching will not be possible between channels which are not
adjacent or over lapping.
2/4 Ports Secure KVM Combiner User Manual