Chapter 1 - Introduction; Features - Honeywell ScanDome II HSDN-251NS/PS Operation & Programming Manual

Chapter 1 – Introduction

1.1 Features

TM
The ScanDome II Keyboard Controller and the ScanDome II
building blocks for any surveillance/security system. Using multiple Keyboard Controllers and
multiple dome cameras, no place is too large for monitoring. Extensible and flexible architecture
facilitates remote control functions for a variety of external switching devices such as
multiplexers and DVRs.
• Built-in 25 times optical power zoom camera with True Night Shot function.(HSDN-251 Series)
• 240 Preset positions.
• 8 Tours consist of Preset, Pattern, Auto-Scan and Tour itself can be programmed over 300
functions and Preset location. While moving, each Preset scan can be watched in smooth
Vector Scan mode.
• 8 Auto Scan including vector scan
• 4 Pattern (240second)
• 8 Privacy zone
• 8 Alarm input / 4 Aux out (NC & NO)
• Variable speed from 0.1°/sec to 90°/sec.
Turbo speed is Max 360°/sec with Ctrl key pressed.
Maximum speed is inversely proportional to the zoom ratio.
• Programmable user preferences (alarm, preset, title, etc.).
• Up to 999 selectable camera addresses (Option 3999)
• Built-in RS-485/422 receiver driver.
• Built-in power-line surge protection and lightning protection
• Clear bubble with black liner (shelter) for concealing the camera.
• Optional Tinted Bubble, Indoor
heater & blower, Indoor Flush Mount
& Outdoor
(HSGN-502)
, Parapet mount & Roof Top mount.
(HSG-502F)
7
TM
dome camera make up the
pendant housing with
(HSGN-502SH)