Honeywell ScanDome II HSDN-251NS/PS Operation & Programming Manual page 21

xxxxx
===
SCAN TYPE
DWELL
003
A08
P01
T02
Follow the steps below to program the Tours:
1. Press Menu to display the main menu on the monitor. Scroll to Tour and push the Joystick
to the right to enter the Tour menu. Or just press the Tour key on the keyboard
2. Choose an empty location to be programmed by pushing the Joystick up, down, right, or
left.
3. To see a stored preset view, use the Joystick to move the cursor to a stored position. By
pressing Prst key, the camera will move to the stored Preset view.
4. To add a stored preset as a Tour, twist the Zoom handle or press Zoom Key (Programmed
preset will scroll). To remove a stored preset from the Tour, press the Home key, blank
position mark (===) will be displayed. You can overwrite the programmed position.
5. To place functions other than preset, press Tour, Ptrn, or Scan for Tour, Pattern or Auto
Scan respectively.
6. Repeat Step 2 through 5 for each desired position. Each title will be displayed on top of the
line.
7. Up to 36 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand the
Tour sequence by calling other programmed tours. Push the Joystick handle to right or left
while the cursor is on the top of the line (TOUR 01) to select another page of the Tour menu.
(TOUR 01)
8. You can enter a title for the selected Tour by twisting the Joystick while the cursor is on
the top of the line (TOUR 01). Rotate the handle clockwise or counterclockwise to scroll
through the alphanumeric characters. Push the handle to the right or left to select the next
or previous digit.
9. Select Save and Exit by pushing the Joystick to the right. Press ESC to exit the program
without saving.
TOUR 01 : xxxxxxxxxxxxxxxx
SCAN TYPE : NORMAL
=== === 003 === === === ===
A08 === === === === === ===
=== T02 === 001 === === ===
=== === === T08 === === ===
=== === === === === === ===
=== === === === === === ===
SAVE AND EXIT ( ESC TO CANCEL)
PRESS FUNCTION KEY AND THEN ZOOM
KEY TO SELECT FUNCTION NO
: 16 digits of title for tour label
: blank preset position
: Max (Normal)/ Slow V. Scan/ Fast V. Scan
: 03-99 Sec
: Preset 003 (1~240)
: Auto Scan 08 (1~8)
: Pattern 01 (1~4)
: Tour 02
15
DWELL: 03
(1~8)