Tensioner Arm Installation - Wide Track - Toro TX525 Service Manual

Tensioner Arm Installation - Wide Track

1. With the bottom side facing up, slide the tensioner
arm far enough into the mainframe so that the
squared portion of the tensioner arm is inserted into
the mainframe (Fig. 1586).
2. Apply grease to the inside of the tensioner wheel
bore (Fig. 1587).
TX525 Service Manual
Fig 1586 PICT-4578
Fig 1587 PICT-4497
DRIVE SYSTEM
3. Place a washer into the greased wheel bore (Fig.
1588).
4. Slide the tensioner wheel, washer side facing in,
onto the tensioner arm shaft (Fig. 1589).
Rev. 000
Fig 1588
PICT-4498
Fig 1589 PICT-4579
7-87