Toro TX525 Service Manual page 329

HYDRAULIC SYSTEM
6. Install and thread the spring retainer into the spool
(Fig. 1080).
7. Place a punch into the spool opening and tighten the
spring retainer with a 13mm wrench (Fig. 1081).
6-66
Fig 1080 PICT-2715a
Fig 1081 PICT-2716a
8. Position the spring block over the spring (Fig. 1082).
9. Place the spring into the spring retainer (Fig. 1083).
Rev. 000
Fig 1082 PICT-2729a
Fig 1083 PICT-2732a
TX525 Service Manual