Toro TX525 Service Manual page 279

HYDRAULIC SYSTEM
7. Using two 7/16" wrenches, install the top washer
and nut securing the handle to the hiflo spacer (Fig.
0889).
8. Lower the valve into the frame (Fig. 0890).
6-16
Fig 0889 PICT-1779a
Fig 0890 PICT-4913a
9. Using a 1/2" socket and wrench, install 2 mounting
bolts and nuts securing the valve to the control panel
frame (Fig. 0891).
10. Plug the safety switch into the wire harness (Fig.
0892).
Rev. 000
Fig 0891 PICT-4912
Fig 0892 PICT-4910
TX525 Service Manual