Toro TX525 Service Manual page 113

ENGINE
2. Using a 10mm socket, install 2 flange nuts securing
the solenoid to the starter assembly (Fig. 0298).
3. Slide the grounding wire onto the starter solenoid
terminal (Fig. 0299).
4-60
Fig 0298 PICT-5217a
Fig 0299 PICT-5216a
4. Slide the white connector lead onto the solenoid
terminal (Fig. 0300).
5. Using a 10mm socket, install the nut securing the
white connector lead and grounding wire to the
starter solenoid (Fig. 0301).
Rev. 000
Fig 0300 PICT-5215a
Fig 0301 PICT-5214a
TX525 Service Manual