Toro TX525 Service Manual page 485

BRAKES
23. Remove the cotter pin from the clevis pin that
secures the brake cable to the brake handle (Fig.
1654).
24. Support the brake handle and remove the clevis pin.
Remove the brake handle (Fig. 1655).
8-6
Fig 1654
PICT-4286
Fig 1655 PICT-4288a
25. Pull down on the brake cable and slide the threaded
portion of the brake cable assembly out of the slot
(Fig. 1656).
26. Pull the brake cable down through the hydraulic lines
(Fig. 1657).
Rev. 000
Fig 1656 PICT-4289
Fig 1657 PICT-4292a
TX525 Service Manual