Toro TX525 Service Manual page 132

69. Slide the red boot off the starter terminal. Using
a 12mm socket, remove the nut from the starter
terminal (Fig. 0370).
70. Remove the positive battery cable from the starter
terminal (Fig. 0371).
TX525 Service Manual
Fig 0370 PICT-5446
Fig 0371 PICT-5447
71. Remove the 2.0mm (grey) fusible link terminal from
the starter terminal (Fig. 0372).
72. Remove the blue spade connector from the starter
terminal (Fig. 0373).
Rev. 000
ENGINE
Fig 0372 PICT-5448
Fig 0373 PICT-5449
4-79