CleaverBrooks CEJS Installation, Operation And Maintanance page 40

Electrode Boiler
Electrode Installation
• Install lifting eye-hook onto electrode shaft.
• Hoist the completed lower electrode assembly up through the boiler 's electrode fitting. Hoisting
procedure will require careful handling of electrode by workers inside the boiler.
Eye-hook
Adapter
Electrode rod
• Once the electrode is seated against the electrode bushing, use
a bottle jack to support the assembly.
• Disengage the winch and begin upper electrode assembly (see Figure 12).
• Temporarily hand-tighten retaining nut and proceed to electrode positioning.
36 750-272