Setting The Display Brightness; Muting The Av Receiver; Using The Sleep Timer - Onkyo HT HT-S7300 Instruction Manual

Using the Music Optimizer
The Music Optimizer function enhances the sound quality
of compressed music files.
Press MUSIC OPTIMIZER on the front panel.
The M.Opt indicator lights on the display.
Tip
• Alternatively, you can use the remote controller's AUDIO and
arrow buttons.
• See "Music Optimizer" for more details

Setting the Display Brightness

You can adjust the brightness of the AV receiver's display.
Press RECEIVER followed by DIMMER repeat-
edly to select: dim, dimmer, or normal brightness.
Tip
• Alternatively, you can use the AV receiver's DIMMER.

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the display.
Tip
• To unmute, press MUTING again or adjust the volume.
• The Mute function is cancelled when the AV receiver is set to
Standby.

Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn
off automatically after a specified period.
Press RECEIVER followed by SLEEP repeatedly
to select the required sleep time.
The sleep time can be set from 90 to 10 minutes in
10 minute steps.
The SLEEP indicator lights on the display when the
sleep timer has been set. The specified sleep time
appears on the display for about 5 seconds, then the
previous display reappears.
Tip
• If you need to cancel the sleep timer, press SLEEP repeatedly
until the SLEEP indicator goes off.
• To check the time remaining until the AV receiver sleeps, press
SLEEP. Note that if you press SLEEP while the sleep time is
being displayed, you'll shorten the sleep time by 10 minutes.
En
26
Selecting Speaker Layout
You can prioritize which speakers you want to use.
(➔ 51).
Note
• If the Powered Zone 2 is being used
be selected.
• When the listening mode that doesn't support front high or sur-
round back speakers is used, the setting cannot be selected.
Using the Audio and Video Menus
By pressing AUDIO or VIDEO, you can have a quick
access to frequently used menus without having to go
through the long standard menu. The menus enable you to
change settings and view the current information.
1
Press RECEIVER followed by SP LAYOUT
repeatedly.
Speaker Layout:FH:
The sound from front high speakers is output
by priority.
Speaker Layout:SB:
The sound from surround back speakers is out-
put by priority.
Press RECEIVER followed by AUDIO or VIDEO.
Either of the following screens will be superimposed
on the TV screen.
BD/DVD
Audio Bass
Video Treble
Info Subwoofer Level
Input Sel Center Level
Listening Mode Dynamic EQ
Dynamic Volume
BD/DVD
Audio
Wide Mode
Video Picture Mode
Info
Input Sel
Listening Mode
(➔ 54), this setting cannot
0dB
Auto