Advanced Operations; Advanced Setup - Onkyo HT HT-S7300 Instruction Manual

Advanced Operations

Advanced Setup

On-screen Setup Menus
The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is con-
nected to the composite video MONITOR OUT or the
COMPONENT VIDEO OUT, use the AV receiver's
display when changing settings.
This manual describes the procedure using the
remote controller unless otherwise specified.
MENU
a 1. Input/Output Assign
2. Speaker Setup
b
c 3. Audio Adjust
4. Source Setup
d
e 5. Listening Mode Preset
6. Miscellaneous
f
g 7. Hardware Setup
h 8. Remote Controller Setup
9. Lock Setup
i
a Input/Output Assign
39)
(➔
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
b Speaker Setup
(➔ 40)
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
c Audio Adjust
42)
(➔
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Theater-Dimensional
d Source Setup
(➔
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
e Listening Mode Preset
(➔ 47)
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. AUX
6. TUNER
En
7. TV/CD
8. PORT
38
f Miscellaneous
48)
(➔
6. Miscellaneous
1. Volume Setup
2. OSD Setup
g Hardware Setup
(➔ 48)
7. Hardware Setup
1. Remote ID
2. Tuner
3. HDMI
h Remote Controller
60)
Setup (➔
8. Remote Controller Setup
Remote Mode Setup
i Lock Setup
44) (➔
9. Lock Setup
Lock
Common Procedures in Setup Menu
ENTER
q/w/e/r
SETUP
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into 9 categories
on the main menu.
Carry out the settings by using the on-screen display.
1
Press RECEIVER followed by SETUP.
The following menu appears.
Tip
• If the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
2
Use q/w to select a menu, and then press ENTER.
3
Use q/w to select target, and then press ENTER.
4
Use q/w to select option and use e/r to change
the setting.
Press SETUP to close the menu.
Press RETURN to return to the previous menu.
50)
Note
• This procedure can also be performed on the AV receiver by
using SETUP, arrow buttons, and ENTER.
• During Audyssey 2EQ
messages, etc., that are displayed on the TV screen will appear
in the Display.
Remote indicator
RECEIVER
RETURN
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
® Room Correction and Speaker Setup,