Speaker Package - Onkyo HT HT-S7300 Instruction Manual

Speaker Package

Subwoofer (SKW-770/780)
For detailed information, see the pages in parentheses.
■
Front
a
a Standby/On indicator
Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the SKW-770/780
automatically turns on when an input signal is
detected in Standby mode. When there's no input sig-
nal for a while, the SKW-770/780 automatically enters
Standby mode.
Front, Center, Surround and Surround Back Speakers
■
HTP-680 (SKF-680, SKC-680, SKR-680, SKB-680)
Front
Front
En
10
SKF-680
a
b
a
Rear
SKR-680/SKB-680
a
b
a
Rear
■
Rear
b c
To AC outlet
b OUTPUT LEVEL control
This control is used to adjust the volume of the sub-
woofer.
c LINE INPUT 17)
(➔
This RCA input should be connected to the SUB-
WOOFER PRE OUT on the AV receiver with sup-
plied RCA cable.
Note
• The Auto Standby function turns the subwoofer on when the
input signal exceeds a certain level. If the Auto Standby function
does not work reliably, try slightly increasing or decreasing the
subwoofer output level on the AV receiver
SKC-680
Front
(➔ 25)
42).
(➔
a b a
Rear