Connecting Your Components With Hdmi - Onkyo HT HT-S7300 Instruction Manual

Connecting Your Components with HDMI

Game console
Satellite, cable, set-top box, etc.
Connect your components to the appropriate jacks. The default input assignments are shown below.
✔: Assignment can be changed
Jack
Input HDMI IN 1
HDMI IN 2
HDMI IN 3
HDMI IN 4
Output HDMI OUT
Refer to "About HDMI" (➔
■
Audio return channel (ARC) function
Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the
AV receiver. To use this function, you must select the TV/CD input selector.
• To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and "HDMI
Control (RIHD)" is set to
Tip
• To listen to audio received by the HDMI IN jacks through your TV's speakers:
– Set the "TV Control" setting to "On"
– Set the "Audio TV Out" setting to "On"
– Set your Blu-ray Disc/DVD player's HDMI audio output setting to PCM.
– To listen to TV audio through the AV receiver, see "Connecting Your Components"
Note
• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV
screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to
another input source, this may result in no sound from the AV receiver or the sound may be cut off.
• When the "Audio TV Out" setting is set to "On"
the sound will be output from the AV receiver's speakers, too. When the
speakers of p-compatible TV, by controlling the AV receiver's volume, the AV receiver's speakers will produce sound while the
TV's speakers are muted. To stop the AV receiver's speakers producing sound, change the settings, change your TV's settings, or turn
down the AV receiver's volume.
VCR or DVD recorder/Digital Video Recorder
(➔ 39).
Signal Components
Audio/Video Blu-ray Disc/DVD player
VCR or DVD recorder/Digital Video Recorder
Satellite, cable, set-top box, etc.
Game console
TV, projector, etc.
72) and "Using an RIHD-compatible TV, Player, or Recorder"
49).
"On"(➔
50) for an p-compatible TV.
(➔
49) when the TV is not compatible with p or the "TV Control" setting to "Off".
(➔
49) to hear from your TV's speakers, by controlling the AV receiver's volume,
(➔
Blu-ray Disc/DVD player
(➔
(➔ 20).
"
TV Control" setting is set to
TV, projector, etc.
Assignable
✔
✔
✔
✔
73).
" " 50) to hear from
On (➔
En
19