Toro 41594 Operator's Manual page 65

Figure 91
1. Bypass fitting
Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (B of Figure
Figure 92
1. Valve open
2. Remove the 2 endcap fitting assembly from each end
of the manifold body
2. Section valve manifold
92).
2. Valve closed
(Figure 93 and Figure 94).
Agitation Valve Manifold
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem capture retainer
5. Endcap fitting
6. Endcap seal O-ring (0.796
inch / 0.139 inch)
65
Figure 93
7. Back seating O-ring (0.676
inch / 0.07 inch)
8. Valve seat ring
9. Mainfold body
10. Ball valve
11. Endcap fitting assembly