Toro 41594 Operator's Manual page 63

Figure 85
1. Flange (pressure filter
head)
2. Manifold (agitation valve)
3. Flange (bypass
valve—agitation valve)
4. Clamp
2. Remove the flanged-head bolt and flanged locknut that
secures the agitation valve to the valve mount and
remove the valve manifold from the machine
86).
Figure 86
1. Flanged-head bolt
2. Manifold (agitation valve)
5. Gasket
6. 3-pin connector (valve
actuator—agitation valve)
7. Flange (master boom
valve)
(Figure
3. Valve mount
4. Flanged locknut
Removing the Master Boom Manifold
Valve
1. Remove clamps and gaskets that secure the manifold
for the master boom valve
boom bypass valve, agitation valve, and 90° flanged
elbow (at the end of the hose for the flow meter).
Note: Retain the clamp(s) and gasket(s)for installation
in Installing the Master Boom Manifold Valve (page
68).
1. Flange (bypass—master
boom valve)
2. Flange (agitation valve)
3. Clamp
4. Gasket
2. Remove the flanged-head bolt and flanged locknut that
secures the master boom valve to the valve mount and
remove the valve manifold from the machine
88).
63
(Figure 87) to the master
Figure 87
5. 90° flanged elbow
6. 3-pin connector (valve
actuator—master boom
valve)
7. Manifold (master boom
valve)
(Figure