Toro 41594 Operator's Manual page 62

Removing the Rate Control Manifold
Valve
1. Remove clamps and gaskets that secure the manifold
for the rate control valve
Note: Retain the clamp(s) and gasket(s)for installation
in Installing the Rate Control Manifold Valve (page
Figure 83
1. Flange (pressure filter
head)
2. Manifold (rate control
valve)
3. Flange (agitation valve)
2. Remove the retainer that secure the outlet fitting to the
manifold for the rate control valve
(Figure 83).
4. Clamp
5. Gasket
6. 3-pin connector (valve
actuator—rate control
valve)
(Figure 84).
67).
1. Flanged-head bolt
2. Valve mount
3. Flanged locknut
3. Remove the 2 flanged-head bolts and 2 flanged
locknuts that secures the rate control valve to the
valve mount and remove the valve manifold from the
machine (Figure
Note: If necessary, loosened the mounting hardware
for the pressure filter head to ease removal of the rate
control valve..
Removing the Agitation Manifold Valve
1. Remove clamps and gaskets that secure the manifold
for the agitation valve
bypass valve, rate control valve, master boom valve,
and adapter fitting (agitation throttle valve).
Note: Retain the clamp(s) and gasket(s)for installation
in Installing the Agitation Manifold Valve (page
62
Figure 84
4. Retainer
5. Socket (outlet fitting)
6. Manifold valve assembly
84).
(Figure 85) to the agitation
67).