Component Video Setup - Onkyo TX-SR603X Instruction Manual

First Time Setup

Component Video Setup

If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select VIDEO,
as explained below.
Input selector
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "0. Initial
Setup," and then press [ENTER].
ENTER
The Initial Setup menu appears.
ENTER
3
Use the Up and Down [
buttons to select an input selec-
tor, and then use the Left and
ENTER
Right [ ]/[
IN1: Use the video component
IN2: Use the video component
IN3: Use the video component
VIDEO: Output composite video
VIDEO IN jack
IN 1
IN 2
IN 3
VIDEO
VIDEO
]/[ ]
]/[ ]
] buttons to select:
connected to COMPO-
NENT VIDEO IN 1.
connected to COMPO-
NENT VIDEO IN 2.
connected to COMPO-
NENT VIDEO IN 3.
and S-Video sources from
the COMPONENT
VIDEO OUT.
4 Press the [SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
43