Onkyo TX-SR603X Instruction Manual page 12

Front & Rear Panels
REMOTE CONTROL
This (Remote Interactive) jack can be con-
nected to an jack on another Onkyo AV compo-
nent. The AV receiver's remote controller can then
be used to control that component. To use , you
must make an analog audio connection (RCA)
between the AV receiver and the other AV compo-
nent, even if they are connected digitally.
CD IN
This analog audio input is for connecting a CD
player's analog audio output.
TAPE IN/OUT
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).
VIDEO 3 IN
Here you can connect a video source (VCR, set-top
box, etc.). Input jacks include S-Video, composite
video, and analog audio.
VIDEO 2 IN/OUT
Here you can connect a VCR. Input and output
jacks include S-Video, composite video, and analog
audio.
VIDEO 1 IN/OUT
Here you can connect a VCR. Input and output
jacks include S-Video, composite video, and analog
audio.
DVD IN
Here you can connect a DVD player. Input jacks
include S-Video, composite video, and analog
audio. You can connect a DVD player's 2-channel
analog audio output or 5.1-channel analog audio
output.
ZONE 2 LINE OUT (74)
This analog audio output can be connected to a line
input on an integrated amplifier in Zone 2.
PRE OUT (21)
The SUBWOOFER jack is for connecting a pow-
ered subwoofer.
AC OUTLET
This switched AC outlet can be used to supply
power to other AV components. The type of outlet
depends on the country in which you purchased
your AV receiver.
See pages 26-36 for connection information.
12