Onkyo TX-SR603X Instruction Manual page 61

Basic Operations
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Source CD, TV, LD,
Listening mode
Direct
Stereo
Mono
PLIIx Movie/Music/Game *3
Neo:6 Cinema
Neo:6 Music *4
Dolby D
Dolby D EX *5
Dolby D+PLIIx Movie *6
Dolby D+PLIIx Music *5
DTS, DTS 96/24
DTS+Neo:6 *5
DTS+Dolby EX *5
DTS+PLIIx Movie *6/Music *5
DTS-ES Discrete *5
DTS-ES Matrix *5
Multich
Mono Movie
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
Full Mono
1. In the Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz, respectively. 96 kHz
signals are processed at 48 kHz for all listening modes other than Direct and Stereo.
2. In the Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else is processed as DTS.
3. If the SurrBack parameter is set to "None," or the Zone 2 speakers are being used, PLII is used.
4. Available only when Surround speakers are connected.
5. Cannot be selected if the SurrBack parameter is set to "None" or the Zone 2 speakers are being used.
6. Cannot select if the SurrBack ch setting is not set to "2ch," or the Zone 2 speakers are being used.
7. If the SurrBack setting is set to "None," or the Zone 2 speakers are being used, DTS is used.
Dolby D
Analog,
PCM*1
3/2, 2/2 2/0 1/0,1+1 Other 3/2, 2/2
VHS, MD,
turntable,
DVD, DTV, etc.
radio,
cassette,
DTV, etc.
❍ ❍ ❍
❍ ❍ ❍
❍ ❍ ❍
❍ ❍
❍ ❍
❍ ❍
❍
❍
❍
❍
❍ ❍ ❍
❍ ❍ ❍
❍ ❍ ❍
DTS/DTS 96/24*2
2/0
DVD, LD, CD, etc.
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍
❍
❍
❍
❍
❍
❍
❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
❍ ❍ ❍ ❍
Multich
1/0, DTS-
Other
1+1 ES
DVD
❍ ❍ ❍ ❍
❍ ❍ ❍
❍ ❍ ❍
❍ ❍
*7
Discrete
Matrix
❍
❍ ❍ ❍
❍ ❍ ❍
❍ ❍ ❍
61