Front Panel; Front & Rear Panels - Onkyo TX-SR603X Instruction Manual

Front & Rear Panels

Front Panel

TX-SR603X
STANDBY/ON
ZONE2 OFF
ZONE 2 LEVEL
PHONES
The page numbers in parentheses show where you can find the main explanation for each item.
STANDBY/ON button (37)
This button is used to set the AV receiver to On or
Standby.
ZONE 2 indicator (76)
This indicator lights up when Zone 2 is selected.
ZONE 2/OFF button (76)
The ZONE 2 button is used to select the input
source for Zone 2.
The OFF button is used to turn off the output of
Zone 2.
ZONE 2 LEVEL button (76)
This button is used to set the volume for Zone 2.
STANDBY indicator (37)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
Remote-control sensor (13)
This sensor receives control signals from the remote
controller.
STEREO button (60)
This button is used to select the Stereo listening
mode.
LISTENING MODE [
These buttons are used to select the listening modes.
Display
See "Display" on page 10.
DISPLAY button (53)
This button is used to display various information
about the currently selected input source.
8
STANDBY
+
TONE
MULTl CH DVD VIDEO 1 VIDEO 2
VCR 1 VCR 2
] [ ] buttons (60)
TUNING / PRESET
ENTER
RETURN
DISPLAY
CLEAR
VIDEO 3 VIDEO 4 TAPE TUNER
DIGITAL INPUT button (42, 72)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
DIMMER button (52)
DIMMER is used to adjust the display brightness.
MEMORY button (59)
This button is used when storing or deleting radio
presets.
TUNING MODE button (54)
This button is used to select the Auto or Manual tun-
ing mode.
RETURN button
This button is used to return to the previously dis-
played onscreen setup menu.
Arrow/TUNING/PRESET & ENTER buttons
When the AM or FM input source is selected, the
TUNING [ ] [
tuner, and the PRESET [
to select radio presets (see page 59). When the
onscreen setup menus are used, they work as arrow
buttons and are used to select and set items. The
ENTER button is also used with the onscreen setup
menus.
MASTER VOLUME
SETUP
VIDEO 4 INPUT
CD
SETUP MIC S VIDEO VIDEO L AUDIO R DIGITAL
] buttons are used to tune the
] [ ] buttons are used