Using remote controller
ON
66
Controlling an Onkyo MD recorder
The
the TX-SR701/701E/601/601E (see page 24).
1. Press the SAT/MD MODE button.
2. Press the desired operation button.
STANDBY
Operation buttons:
ON: Turns on and off MD player (same as STANDBY button on
the remote controller)
SAT/MD MODE
VOL
: Stop
MUTING
REC G: Record
MD
: Pause
operation
: Eject
buttons
1 to 9, 0, --/---: Numeric keys
ENTER: Enters the settings
You may also use the following buttons:
Numeric keys
VOL
MUTING: Activates muting function at TX-SR701/701E/601/601E
ENTER
Note:
The SAT/MD button is used for operating satellite tuners and
Onkyo MD recorders. Be aware that if you enter the preset code for
a satellite tuner as shown on page 65, then this button cannot be
used to operate Onkyo MD recorders.
If this is the case, to operate an Onkyo MD recorder, you must first
erase the satellite tuner code by following the directions given in
"Erasing all the commands programmed under a MODE button" on
page 72.
connector of the Onkyo MD recorder must be connected to
The SAT/MD MODE button lights.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo MD recorder.
: Track down
: Track up
: Play
: Skip backward
: Skip forward
: Adjusts volume at TX-SR701/701E/601/601E