Table of Contents
Advertisement
Audio Adjust
STANDBY/ON
POWER
STANDBY
ON
OFF
REC OUT
ZONE
2
OFF
LEVEL
DISPLAY
PHONES
DIRECT/
AUDIO
PURE AUDIO
SELECTOR
DVD
VIDEO 1
PURE AUDIO
VCR 1
These settings are enabled depending on the listening mode or input
signal.
Setup Procedure
1. Press the AUDIO ADJUST button.
The Audio Adjust settings appear in the front display and on the
monitor.
Bass
Treble
Note:
The items that appear in the menu depend on the currently selected
listening mode or the input signal.
2. Use the
and
cursor buttons to select the item that
you want to set.
3. Use the
and
cursor buttons to set the value.
Setting
Values
Bass
–12 to +12
Treble
–12 to +12
LFE Level*
–∞, –10 to 0 dB
Double Bass
On, Off
Late Night
Off, Low, High
Center Image
0, 1, 2, 3, 4, 5
Panorama
On, Off
Dimension
0, 1, 2, 3, 4, 5, 6
Center Width
0, 1, 2, 3, 4, 5, 6, 7
Front Effect
On/Off
Reverb Level
Low/Middle/High
Reverb Time
Short/Middle/Long
Input Channel
L+R/Left/Right
Academy*
On/Off
Listening Angle
20°/40°
Center
On/Off
Front Expand
On/Off
AUDIO ADJUST
MASTER VOLUME
AUDIO
ADJUST
SETUP
RETURN
TUNI NG
PRESET
LISTENING MODE
RT/PTY/TP
STEREO
SURROUND
THX
DSP
MEMORY
FM MODE
ENTER
CLEAR
VIDEO
4
INPUT
VIDEO 2
VIDEO 3
VIDEO 4
TAPE
TUNER
CD
PHONO
VCR 2
DIGITAL
S VIDEO
VIDEO
L
AUDIO
/
/
/
:
0dB
:
0dB
Initial value
0
0
0 dB
On
Off
3
Off
3
3
On
Middle
Middle
L+R
Off
40°
Off
Off
R
Setting
Dialog Enhance
Virtual Surround
Level
* TX-SR701/701E only
Bass, Treble
Separately adjust the bass and treble settings in 2-step increments.
The Bass and Treble adjustments are only enabled for the front left
and right speakers.
Note:
If Direct, Pure Audio (TX-SR701/701E only), or THX (TX-SR701/
701E only) is selected as the listening mode, these settings cannot
be made. To make these settings, first select another listening mode.
Double Bass
The Double Bass function boosts the bass sound by letting the bass
sound of "Front L/R" speakers output also from the subwoofer. To
enable this function, in the "Speaker Config" menu, set the
"Subwoofer" to "Yes" and "FrontL/R" to "Large."
The Double Bass function is effective especially when the input is
monaural, 2-channel or PCM 96kHz signal.
On: Select to turn on the Double Bass function.
Off: Select to turn off the Double Bass function.
Late Night
The audio for movies made for the cinema have a large dynamic
range; thus, the difference between loud noises and soft noises is
great. To hear the quieter sounds such as background noises or
human conversations, the movie must be played back at larger
volumes. When this setting is set to "High" or "Low," the dynamic
range of the sound is narrowed down to allow you to easily hear
minute sounds at low volumes. This function is especially useful if
you wish to play a movie at low volumes during the nighttime.
This can be set to either "Off" or "Low," or "High." When this
setting is set to "High" or "Low," the dynamic range of the sound is
narrowed down to allow you to easily hear minute sounds at low
volume.
Off: Select to turn off the Late Night function.
Low: Select to narrow down the dynamic range.
High: Select to further narrow down the dynamic range.
Notes:
• The Late Night function is effective only on Dolby Digital
encoded software.
• The depth of the Late Night effect is determined by Dolby
Digital software. With some sources, it may produce little or no
effect.
/
/
/
AUDIO ADJUST
Values
Initial value
On/Off
Off
–3 to +3
0
57
Hide quick links:
Advertisement
Table of Contents
