Specifications; Attachments/Accessories - Toro 41199 Operator's Manual

right and left booms and 3 on the center boom all spaced
20 inches (50.8 cm) apart.
Calibration Buttons
The monitor has the following buttons:
•
Reset
Resets the Total Volume, Sub Volume, Distance, Total
Area, and Sub Area display settings to 0.
•
Calibrate
Used to enter and exit the calibration mode.
•
Decrease
Reduces values displayed on the screen during calibration.
•
Increase
Increases values displayed on the screen during
calibration.
Calibration Settings
•
Boom Width
•
Units of Measure
•
Speed/Distance
•
Flowmeter

Specifications

Note: Specifications and design are subject to change
without notice.
Weight with standard spray
system, empty, without
operator
Weight with standard spray
system, full, without operator
Maximum gross vehicle weight
(GVW) (on level ground)
Overall length with standard
spray system
Overall height with standard
spray system to the top of the
booms stored in the X position
Overall height with standard
spray system
Overall width with standard
spray system booms stored in
the X position
Ground clearance
Wheel base
Tank capacity (includes the CE
5% overflow)

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
23
2,104 lb (954 kg)
3,661 lb (1,660 kg)
4,163 lb (1,888 kg)
133 inches (337 cm)
91 inches (231 cm)
70 inches (178 cm)
69 inches (175 cm)
4.5 inches (11.4 cm)
62 inches (157 cm)
175 US gallons (662 L)