Solving Application Problems - Brother GT-341 Instruction Manual

7. Troubleshooting

7-3. Solving Application Problems

See also the pages of each application software in "4. Printing Directly from Applications".
Problem
The image sent from
Illustrator 10 is printed 90 degree
rotated.
The image sent from Adobe
Illustrator CS is printed 90 degree
rotated.
The Platen Size setting changes to
Platen 10 x 12 (this happens
especially when printing the image
smaller than 14 x 16 inches).
The image sent from Adobe
Illustrator cannot be printed on
proper position, or it cannot be sent
and result in errors.
There are some Properties windows
shown in Photoshop. When the
values of Printing Preferences in
Windows are set beforehand and
you modified the values from the
printer driver Properties window of
Photoshop, mismatching information
appears among different dialog
boxes.
The Print Data saved in the file (.ar3)
is extremely large.
In CorelDRAW 12 and 11,
sometimes outlines of warped
artwork cannot be printed.
158
Cause
Adobe The Print
Setup or
Document
Setup is not
appropriate.
The Print
Setup or
Document
Setup is not
appropriate.
――
――
――
――
――
GT-3 Series
In Adobe Illustrator 10 follow the instruction below, and
then try to send the print data again:
(1) Open "Print Setup" in the "File" menu.
(2) Select GT-3 as the printer, and then click "OK".
(3) Open "Document Setup" on "File" menu.
(4) Check "Use Print Setup".
(5) Confirm the "Orientation", "Width" and "Height".
If they are not appropriate, correct them, and then
click "OK".
With Adobe Illustrator CS, landscape image may not be
printed properly. Correct the setting following the
instruction below, and then try to send the print data
again:
(1) Open "Print" in the "File" menu.
(2) Confirm that the Media Size is "Defined by Driver".
(3) Change the Media Orientation to the portrait.
(4) If you are not changing the Platen size, skip to step
(8). If you want to change the Platen Size, click
"Setup...", and then click "Continue".
Print window appears.
(5) Click "Preference".
(6) Change the Platen Size in the Printer Driver Window,
and then click "OK".
(7) Click "Print" in the Print window.
(8) Confirm the preview, and then click "Print" to send the
data to your printer.
Check the Platen Size in the Printer Driver window before
you send the print data to your printer.
See "4-2-4. Setting for Adobe Illustrator".
The setting in the Properties of the Print window is
applied.
The print data of 1200 dpi x 1200 dpi is four times larger
than the one of 600 dpi x 600 dpi. Confirm the file size.
Upgrade CorelDRAW to X3 or higher.
Solution