Brother GT-341 Instruction Manual page 119

(2) Remove the used Ink Cartridge from the slot of the printer. Put your finger to the handle and pull out the Ink
Cartridge.
<Note>
Leave the used Ink Cartridge installed until just before the replacement. Leaving your printer with no Ink
Cartridge installed may cause ink leakage or other serious damages.
(3) Confirm the direction and the color of the new Ink Cartridge and put the bottom edge on the base and slide it
to the back of the slot.
<Note>
Confirm the color of the ink cartridge. Loading a wrong color causes serious damage to print quality, and
could damage to the Print Heads. If you have installed a wrong color, immediately contact Brother or your
dealer for a service call.
(4) When you have replaced either one of the White, Cyan or Magenta Ink Cartridge, replace the Maintenance
Parts packed together in the Carton. Clean the Caps and Wipers, replace the Wiper Cleaners, Fan Filter,
Roller Felts (4), Flushing Plate Sponge (top) and Flushing Plate Felt (bottom) according to our maintenance
schedule to maintain good print quality. See "6-1-2." and the following pages. This is really important to keep
your printer in good condition.
<Note>
 Do not repeat unnecessary uninstalling / installing the Ink Cartridge.
 Dispose the used Ink Cartridge in compliance with your local regulations.
GT-3 Series
6. Maintenance
Handle
0055Y
0056Y.0057Y
109