Solving Application Problems - Brother GT-341 Instruction Manual

7. Troubleshooting

7-3. Solving Application Problems

See also the pages of each application software in "4. Printing Directly from Applications".
Problem
The image sent from Adobe Illustrator 10
is printed 90 degree rotated.
The image sent from Adobe Illustrator
CS is printed 90 degree rotated.
The Platen Size setting changes to
Platen 10 x 12 (this happens especially
when printing the image smaller than 14
x 16 inches).
The image sent from Adobe Illustrator
cannot be printed on proper position, or it
cannot be sent and result in errors.
There are some Properties windows
shown in Photoshop. When the values
of Printing Preferences in Windows are
set beforehand and you modified the
values from the printer driver Properties
window of Photoshop, mismatching
information appears among different
dialog boxes.
The Print Data saved in the file (.ar3) is
extremely large.
In CorelDRAW 12 and 11, sometimes
outlines of warped artwork cannot be
printed.
128
Cause
The Print In Adobe Illustrator 10 follow the instruction below, and then try
Setup or to send the print data again:
Document
(1) Open "Print Setup" in the "File" menu.
Setup is not
(2) Select GT-3 as the printer, and then click "OK".
appropriate.
(3) Open "Document Setup" on "File" menu.
(4) Check "Use Print Setup".
(5) Confirm the "Orientation", "Width" and "Height".
If they are not appropriate, correct them, and then click
"OK".
The Print With Adobe Illustrator CS, landscape image may not be printed
Setup or properly. Correct the setting following the instruction below, and
Document then try to send the print data again:
Setup is not
(1) Open "Print" in the "File" menu.
appropriate.
(2) Confirm that the Media Size is "Defined by Driver".
(3) Change the Media Orientation to the portrait.
(4) If you are not changing the Platen size, skip to step (8). If
you want to change the Platen Size, click "Setup...", and
then click "Continue".
Print window appears.
(5) Click "Preference".
(6) Change the Platen Size in the Printer Driver Window, and
then click "OK".
(7) Click "Print" in the Print window.
(8) Confirm the preview, and then click "Print" to send the data
to your printer.
Check the Platen Size in the Printer Driver window before you
――
send the print data to your printer.
―― See "4-2-4. Setting for Adobe Illustrator".
―― The setting in the Properties of the Print window is applied.
The print data of 1200 dpi x 1200 dpi is four times larger than
――
the one of 600 dpi x 600 dpi. Confirm the file size.
―― Upgrade CorelDRAW to X3 or higher.
GT-3 Series
Solution