Color Multiple Pass Printing; Settings For Color Inks - Brother GT-341 Instruction Manual

4. Printing Directly from Applications

4-3-9. Color Multiple Pass Printing

Make this menu ON when you see some thin white lines (clearance between the printed lines) with all Print Head
Nozzles are firing properly. Multiple Pass Printing is to move the Platen Feed by half for more precise printing so
that the print time is doubled but the "regular" clearance will not be seen easily. Color Multiple Pass Printing is ON
automatically when more-than-one-layer White Ink is printed.
<Note>
You do not have to select Color Multiple Pass Printing simply because White Ink is automatically Multiple Pass
Printing when the print data has more than one White layer.

4-3-10. Settings for Color Inks

The [ Ink Volume ] in [ Color Settings ] appears on when [ Color Only ] is selected. This function is the same as
GT-541/GT-782.
Ink Volume
To get the best print result, you may need to adjust the amount of ink depending on the fabric of the T-shirt to
prevent ink-spreading (blurring). Print "InkVolume_1200.ar3" or "InkVolume_600.ar3" first and select the best ink
volume by sliding the Ink Volume tab. It is in [ All Program ] > [ Brother GT-3 Tools ] > [ Test Data ].
Example 1 (50% cotton 50% polyester thin T-shirt)
Example 2 (100% polyester synthetic leather fabric)
<Note>
The menu "Double Printing" and "Yellow/Black Printing" are eliminated by the improvement of Print Heads.
The following pages indicate the [ Advanced ] menu. See the dialog image in Step 3 (4) in "4-3-13
image file on Transparent Layer".
80
"7" is the best by the print result of "InkVolume_600.ar3"
"3" is the best by the print result of "InkVolume_600.ar3"
GT-3 Series
Printing the