Electrical Requirements; Software Information; Other Requirements - Brother GT-341 Instruction Manual

1. Read This First

1-3-2. Electrical Requirements

Power:
Single-phase 100-240 V, 50/60 Hz
Power Consumptions:
0.4 A (average)

1-3-3. Software Information

Supported OS:
Windows Vista, Windows 7, Windows 8 (32bit/64bit)
Latest Windows XP (32 bit),
Supported Interface:
USB 2.0
Minimum System Requirements:
256 MB RAM (512 MB or more is recommended),
128 MB free disk space (256 MB or more is recommended),
1 GHz CPU (2 GHz or more is recommended.)
Recommended Applications for precise output:
Adobe Photoshop, Adobe Photoshop Elements, (for BMP editing)
Adobe Illustrator, CorelDRAW (for Vector Data editing)
Corel Paint Shop Pro

1-3-4. Other Requirements

When purchasing optional tools and devices, choose one that meets the following requirements.
USB cable:
USB 2.0-compliant device cable (A/B)
<Note>
Using other USB 2.0-compliant device cable may result in improper connection.
USB flash memory:
FAT 32 formatted,
Capacity under 32 GB,
Heat Press:
Must be able to handle the area of Platen 14 x 16 (355.6 mm x 406.4 mm) and maintain heat production of 356 °F
(180 °C) for 35 seconds. Pretreatment must be cured with the heat press instead of oven to keep the surface flat
and smooth.
<Note>
When you print with White ink, we recommend using oven instead of heat press. (320°F (160 °C), 3 and half
minutes with the tunnel 2.4 meter long as a rough indication)
Separator sheet:
Be sure to use this sheet to make the surface smooth and flat when you cure Pretreatment and Ink. When you
cure printed ink, use this for separation.
Urethane mat (continuous foam):
When you cure the Pretreatment, use this to release the hot air quickly.
6
GT-3 Series