Brother GT-341 Instruction Manual page 108

4. Printing Directly from Applications
How to apply with the roller:
(1) Pour the Pretreatment onto the tray. Place the roller into pretreatment and make it absorb enough
pretreatment. Our option Roller is recommended to apply even and smooth.
(2) Draw the roller softly and remove unnecessary pretreatment. Roll back and forth smoothly and slowly.
Weight the T-shirt before / after then you can see the amount of applied Pretreatment to help you acquaint.
(3) Put the T-shirt on the heat press. Keep the surface flat without wrinkles. Use glass cloth sheet or fluorine
coated sheet (Teflon Sheet) and press with high pressure. Curing condition is the same as ink: 180°C
(356°F) in 35 seconds.
(4) Remove the T-shirt from the heat press and cool.
98
GT-3 Series