Brother GT-341 Instruction Manual page 171

Error
Message
code
2101 Not Enough Area
USB flash drive Access
2102
Error
No Files
2105
3000 PC Communication Error
3001 PC Communication Error
3002 PC Data Error
3003 PC Data Error
3004
3005
3010 PC Data Error
3013
3014
PC Data Error (with
3100
White)
PC Data Error (381 mode)
3101
Blank Data
3407
3408 PC Data Error (too large)
3410
3411
PC Data Error
3412
Meaning
The USB flash drive does not have
enough area for saving.
The mounted USB flash drive is
out of support, or USB flash drive
is broken.
No available data in the USB flash
drive.
GT-3 failed to receive the print
data from the PC.
The PC will not receive the data
sent from GT-3.
GT-3 received the data that is not
supported.
No compatibility of version
between the PC driver and the
GT-3 firmware.
USB connection error between PC
and GT-3
GT-341 received the print data
with White print data included.
GT-361 received the print data
with 4 White Print Head data
included.
GT-3 received blank data, the print
data with no print data included
(e.g. 255 white) was made and
sent to GT-3, the image was larger
than the print area and some blank
part was sent to GT-3.
The size of the received print data
was too large.
USB connection error between PC
and GT-3
GT-3 Series
Solution
Check the free space of the USB flash drive with
PC.
Mount a USB flash drive with free area available.
Check the spec and type of the USB flash drive.
See "7-1. Solving Printer Problems".
Confirm by connecting the USB Flash Drive to
your PC; double-click the saved AR3 file to
confirm the data.
See "7-1. Solving Printer Problems".
Check the connection between the PC and GT-3,
and send print data again. If it has no effect,
reboot both the PC and GT-3.
This error occurs when the USB cable is
disconnected during data transmission, or data
transmission is canceled on the PC.
Check the connection between the PC and GT-3,
and retry the PC operation with the GT-3 tools. If it
has no effect, reboot both the PC and GT-3.
This error occurs when the USB cable is
disconnected during data transmission, or GT-3
tools are canceled in sending data to the PC.
Check the connection between the PC and GT-3,
and send print data again. Or reboot both the PC
and GT-3.
GT-3 Firmware is old though the Printer Driver is
upgraded. Confirm the versions and upgrade the
firmware.
Confirm the data (AR3 file and firmware
programs ) are correct. Check the connection
between the PC and GT-3, and send print data
again. Or reboot both the PC and GT-3. These
errors may occur when GT-3 malfunctions in
improper environment. You can print if no error is
indicated.
Confirm that the Machine Mode is GT-341 by
Printer Driver. GT-341 cannot receive the print
data with White print data included.
Confirm that the Machine Mode is GT-361 by
Printer Driver. GT-361 cannot receive the print
data with four White Print Head data included.
Confirm the print data with GT-3 File Viewer.
Confirm the print area and paper size with e.g.
Photoshop Print Preview.
**
Confirm the data (AR3 file and firmware
programs ) are correct. Check the connection
between the PC and GT-3, and send print data
again. Or reboot both the PC and GT-3. These
errors may occur when GT-3 malfunctions in
improper environment. You can print if no error is
indicated.
7. Troubleshooting
161