Brother GT-341 Instruction Manual page 172

7. Troubleshooting
Error
Message
code
4100
4101
4102
4103
USB flash drive Access
4104
Error
4105
4106
4107
4108
4109
No Files
4110
4200
4201 Message data Error
4202
4300
4301 Font data Error
4302
4400
4401 Test print data Error
4402
4500 Machine Error
4501 Machine Error
4502 Machine Error
4503 Machine Error
5001
5002
Machine Error
5020
5021
5090
Machine Error
5091
162
Meaning
The file cannot be opened.
No file can be created.
The file cannot be closed.
Failure in searching file
Failure in reading file
Failure in writing file
Illegal file data
Illegal file size
Failure to get the file size
Failure in searching file
No file is found.
Error in selected language data for
the Display.
Error in font data for the Display.
Error in the Print Data in the menu
for Test Print Data
Cannot start the Network Interface
Detects Illegal IP address and/or
Subnet mask.
Cannot assign Network Interface
Detects Illegal Default Gateway
Communication error inside the
firmware.
Caps were not open.
Caps were not closed.
GT-3 Series
Solution
Check the contents in the USB flash drive.
Re-mount the USB flash drive and retry the
operation.
Or reboot GT-3. See " 7-1. Solving Printer
Problems".
Check the contents in the USB flash drive.
Or reboot GT-3. See " 7-1. Solving Printer
Problems".
Update firmware again from the beginning if you
find this error after you cancel the firmware update.
Contact your dealer or Brother.
Press OK Button to recover. Check the network
and contact your Network Administrator. Contact
your dealer or Brother with mechanical damage.
Press OK Button to recover. Assign the proper IP
address and Subnet mask with GT-3 Maintenance
Tool.
Press OK Button to recover. Check the network
and contact your Network Administrator. Contact
your dealer or Brother with mechanical damage.
Press OK Button to recover. Assign the proper IP
address and Subnet mask with GT-3 Maintenance
Tool.
**
**
**