Brother GT-341 Instruction Manual page 175

Error
Message
code
5491 Machine Error
6004 Clearance Sensor Failure Malfunction of Clearance Sensor
Machine Error
6010
Machine Error
6011
Machine Error
6012
Machine Error
6020
6021 Fail: No Battery
6031 Fail: Panel Button
6032 Fail: Panel Button
6033 Fail: Panel Button
6034 Fail: Panel Button
6035 Fail: Panel Button
6036 Fail: Panel Button
6037 Fail: Panel Button
6038 Fail: Panel Button
6040 Machine Error
Machine Error
6100
Adjust CR
6101 Machine Error
6102
Machine Error
Adjust CR
6103
6104 Machine Error
6105 Machine Error
Machine Error
6106
Machine Error
6107
6108 Machine Error
6109 Machine Error
6110 Machine Error
Machine Error
6111
Machine Error
6112
Machine Error
6113
Machine Error
6114
Meaning
Internal Error of Maintenance Unit **
Failure of writing to EEPROM in
Main PCB
Failure of deleting Flash ROM in
Main PCB
Failure of writing Flash ROM in
Main PCB
Illegal Real Time Clock
Dead Battery of Real Time Clock
Platen Button may be
malfunctioning.
Print Button may be
malfunctioning.
Stop Button may be
malfunctioning.
Back Button may be
malfunctioning.
OK Button may be malfunctioning.
Down Button may be
malfunctioning.
Up Button may be malfunctioning.
Head Cleaning Button may be
malfunctioning.
Could not detect Head Memory
Illegal Carriage Move (Speed
Error)
Carriage move did not complete.
Failure in stopping the Carriage at
the proper position
CR time-out of the Carriage during
printing
CR time-out of the Carriage during
flashing
Malfunction of Origin Sensor in CR
returning to the origin
Illegal termination of CR returning
to the origin
Illegal adjustment of CR Speed
Abnormal decrease of CR Speed
GT-3 Series
Solution
**
**
**
**
**
**
Check it something is on the Control Panel and
pushing the button.
Contact your dealer or Brother.
**
Clean GT-3 by referring ""6-1-7. Cleaning the
Encoder Strip" and "6-1-6. Cleaning the inside of
the printer and restart". Contact your dealer or
Brother if the cleaning has no effect.
Check whether the media is jamming in the
Carriage.
Clean GT-3 by referring ""6-1-7. Cleaning the
Encoder Strip" and "6-1-6. Cleaning the inside of
the printer and restart". Contact your dealer or
Brother if the cleaning has no effect.
**
**
**
**
**
**
**
**
**
**
7. Troubleshooting
165