Electrical Hazards - Brother HL-L5210DN Product Safety Manual

DO NOT place any objects around the product. Such objects block the access to the electrical
socket in case of emergency. It is important that the product can be unplugged whenever
needed.
This product emits some chemical substances during printing, and additionally if used for
prolonged periods or in poorly ventilated areas may cause the emission of odorous gases
such as ozone. Place the product in a well-ventilated area for optimum performance and
comfort.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or generate magnetic
fields. Doing so may interfere with the operation of the product, causing print quality
problems.
• DO NOT place your product next to sources of interference, such as speakers or the base
units of non-Brother cordless telephones. Doing so may interfere with the operation of the
product's electronic components.
Connect the Product Safely
WARNING

ELECTRICAL HAZARDS

Failure to follow the warnings in this section may create the risk of an electrical shock. In
addition, you could cause a short circuit, which may create the risk of fire.
There are high-voltage electrodes inside the product. Before you access the inside of the
product, including for routine maintenance such as cleaning, make sure you have unplugged
the telephone line cord first (models with the fax function only) and then the power cord from
the electrical socket, as well as any telephone/RJ-11 (models with the fax function only) or
Ethernet/RJ-45 cables (network models only) from the product.
DO NOT push objects of any kind into this product through slots or openings in the product,
as they may touch dangerous voltage points or short-out parts.
5