Table of Contents
Advertisement
Connect it to the engine or frame. Do not connect the
jumper cable to the fuel system.
1. Battery
4. Start the engine in the vehicle providing the jump start.
Let it run a few minutes, then start your engine.
5. Remove the negative jumper cable first from your
engine, then the battery in the other vehicle.
6. Install the battery cover to the battery base.
Fuses
The fuses for the machine's electrical system are located
under the center of the dash panel (Figure 41 and Figure 42).
1. Fuses
Figure 40
Figure 41
34
Figure 42
Advertisement
Table of Contents
