Specifications; Safety; General Safety Rules - Pacific hydrostar 95338 Assembly And Operating Instructions Manual

Electrical Requirements
Water Pressure
Flow Rate
Water Supply Required
Hose Length
Additional Feature
Weight
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
REAd And UndERStAnd All InStRUctIOnS
failure to follow all instructions listed below may result in
Keep your work area clean and well lit. Cluttered and dark work areas invite ac-
1.
cidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
2.
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distrac-
3.
tions can cause you to lose control.
Grounded tools must be plugged into an outlet properly installed and grounded in
1.
accordance with all codes and ordinances. Never remove the grounding prong or
for technical questions, please call 1-800-444-3353;
SKU 95338

SPEcIfIcAtIOnS

120 V / 60 Hz / 13 A
3-Prong GFCI Power Plug
35 Ft. Long Power Cord
1,800 PSI
2.1 Gallons Per Minute
3-4 gPM minimum
19 Ft.
Safety Lock Off Trigger
36.5 lb.
SAVE tHIS MAnUAl

gEnERAl SAfEty RUlES

IMPORtAnt SAfEty InStRUctIOnS!
WARnIng!
electric shock, fire, and/or serious injury.
SAVE tHESE InStRUctIOnS
WORk AREA
ElEctRIcAl SAfEty
troubleshooting section at end of manual.
3092905 3092905
PAGE 3