Table of Contents
Advertisement
Gas Engine
Pressure Washer Gun
Water Pressure
Water Output
Water Supply Require-
ments
High Pressure Hose
Water Nozzle
Wheels
Garden Hose Fitting
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the manual. Write
the invoice number on the inside of the front cover. Keep the manual and invoice in a safe
and dry place for future reference.
WARninG: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment. Read and adhere to all warnings and
safety precautions BEFORE use.
1.
Keep work area clean. Cluttered areas
invite injuries.
2.
Observe work area conditions. Keep
work area well lighted.
3.
Keep children away. Children must
never be allowed in the work area. Do
not let them handle machines, tools, or
extension cords.
4.
Store idle equipment. When not in use,
tools must be stored in a dry location to
inhibit rust. Always lock up tools and
keep out of reach of children.
5.
Use the right tool for the job. Do not
attempt to force a small tool to do the
work of a larger industrial tool. There are
certain applications for which this tool
SKU 94201
For technical questions, please call 1-800-444-3353.
Specifications
®
Mitsubishi,
OHV Engine 6 HP, unleaded gas, recoil, 3,600 RPM,
low oil shutdown; Oil capacity: 20 oz. (0.6 L); Gas capacity: 4 quarts (3.6 L)
Refer to the Mitsubishi maintenance manual for further details
2,900 PSI Maximum, Safety trigger activated gun,
140° F (60° C) Temp. Maximum (use cold water only).
2,200 PSI rated, 2,650 PSI maximum
2.2 GPM maximum; unloader valve
3+ GPM recommended; 1.62 GPM minimum
27 feet
Safety Trigger Handle with lock-off, spray output adjustment;
150- Bar / 2,175 PSI
2 - Pneumatic wheels
Quick connect, fitting coupler, ¾ inch I.D.
Save this Manual
Safety Warnings and Precautions
Read all instructions before using this tool!
was designed. It will do the job better and
more safely at the rate for which it was
intended. Do not modify this tool and do
not use this tool for a purpose for which
it was not intended.
6.
Dress properly. Do not wear loose
clothing or jewelry as they can be
caught in moving parts. Protective,
electrically non-conductive clothes and
non-skid footwear are recommended
when working. Wear restrictive hair
covering to contain long hair.
7.
Use eye and ear protection.
Always wear ANSI-approved
impact safety goggles, heavy
rubber boots, and hearing protection
during use. During pressure washing,
Page 2
Advertisement
Table of Contents
