Pacific hydrostar 212cc Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Pacific hydrostar Manuals
  4. Pressure Washer
  5. Pacific Hydrostar 212cc Gasoline Powered Clear Water...
  6. Owner's manual & safety instructions
Pacific hydrostar 212cc Owner's Manual & Safety Instructions

Pacific hydrostar 212cc Owner's Manual & Safety Instructions

212cc gasoline powered pressure washer
Hide thumbs Also See for 212cc:
Table of Contents

Advertisement

Quick Links

See also: Manual
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
212cc GASOLINE POWERED

PRESSuRE WAShER

using an engine indoors
Can Kill YOu in minuteS.
engine exhaust contains carbon monoxide.
this is a poison you cannot see or smell.
neveR use inside
Only use OutSiDe
a home or garage,
and far away from
even iF doors and
windows, doors,
windows are open.
and vents.
visit our website at: http://www.harborfreight.com
email our technical support at: predator@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-520-0882 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
ITEM 69734/69737
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 212cc and is the answer not in the manual?

Questions and answers

Related Manuals for Pacific hydrostar 212cc

Summary of Contents for Pacific hydrostar 212cc

  • Page 1: Pressure Washer

    (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 69734/69737 212cc GASOLINE POWERED PRESSuRE WAShER using an engine indoors Can Kill YOu in minuteS.

  • Page 2: Table Of Contents

    Safety ............3 Troubleshooting ......... 20 Setup ............8 Warranties ..........22 Operation ........... 11 Parts Lists and Diagrams ......24 Specifications Displacement 212cc Engine Type Predator OHV Pump Brass Axial Drive Direct 22 IN. Wand / 20 IN. Lance Nozzles Quick Connect 0º, 15º, 25º, 40º...

  • Page 3: Safety

    WaRninG SYmBOlS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 4: Set Up Precautions

    Set up precautions 1. Gasoline fuel and fumes are flammable, and 6. Wear ANSI-approved safety goggles, heavy-duty potentially explosive. Use proper fuel storage work gloves, and dust mask/respirator during set up. and handling procedures. Do not store fuel 7. Use only lubricants and fuel recommended or other flammable materials nearby.
  • Page 5 Operating precautions (cont.) 13. Parts of the Pressure Washer, especially 22. Before use, check for misalignment or binding exhaust system components, get very hot of moving parts, breakage of parts, and any during use. Stay clear of hot parts. other condition that may affect the equipment’s operation.

  • Page 6: Vibration Hazard

    vibration hazard: This tool vibrates during use. Repeated or 2. Do not smoke during use. Nicotine reduces long-term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury, increasing the risk of vibration-related injury. particularly to the hands, arms and shoulders.

  • Page 7: Service Precautions

    Service precautions 1. Before service, maintenance, or cleaning: 10. Have the equipment serviced by a qualified repair person using only identical replacement parts. a. turn the engine switch to its “OFF” position. This will ensure that the safety of the equipment b.

  • Page 8: Setup

    Set up Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO pRevent SeRiOuS injuRY: Operate only with proper spark arrestor installed. Operation of this equipment may create sparks that can start fires around dry vegetation.

  • Page 9: Assembly

    assembly 1. Operation of this equipment may create sparks 5. Pull the Collar at the end of the hose back that can start fires around dry vegetation. A spark and attach the Gun (19) to the hose. arrestor may be required. The operator should 6.

  • Page 10: Engine Controls

    engine Controls Fuel Cap air Filter Starter handle muffler Oil Drain plug throttle Dipstick Choke Fuel valve engine Switch Page 10 For technical questions, please call 1-800-520-0882. ITEM 69734 / 69737...

  • Page 11: Operation

    Operation Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. pre-Start Checks Inspect engine and equipment looking for damaged, loose, and missing parts before set up and starting.

  • Page 12: Checking Pump Oil Level

    Checking pump Oil level 1. The Oil pump is filled with 3.75 fl-oz of SAE 10W-30 NON DETERGENT oil at the factory. under normal conditions there is no reason to add any oil or change the oil. 2. Turn off engine, allow it to cool and disconnect the spark plug wire.

  • Page 13: Starting The Engine

    Starting the engine 1. To start a cold engine, move the Choke to the CHOKE position. To restart a warm engine, leave the Choke in the RUN position. Choke 2. Open the Fuel Valve. 3. Slide the Throttle or Speed Control Lever to 1/3 away from the SLOW position (the “turtle”).

  • Page 14: Stopping The Engine

    impORtant: Allow the engine to run at no load for five minutes with no load after each start-up so that the engine can stabilize. 7. Adjust the Throttle as needed. 8. Break-in period: a. Breaking-in the engine will help to ensure proper equipment and engine operation. b.
  • Page 15 pressure Washer Operation WaRninG Do not direct spray from the pressure washer at a person or an animal. the water stream could cause serious injury. CautiOn use the pressure washer only on surfaces able to withstand the force of the spray. 1.

  • Page 16: Maintenance

    maintenance WaRninG tO pRevent SeRiOuS injuRY FROm aCCiDental StaRtinG: turn the power Switch of the equipment to its “OFF” position, wait for the engine to cool, and disconnect the spark plug cap before performing any inspection, maintenance, or cleaning procedures. tO pRevent SeRiOuS injuRY FROm equipment FailuRe: Do not use damaged equipment.
  • Page 17 Checking and Filling Fuel WaRninG! tO pRevent SeRiOuS WaRninG! tO pRevent Fuel injuRY FROm FiRe: leaKaGe anD FiRe hazaRD, do not fill Fill the fuel tank in a well-ventilated area fuel above the bottom of fuel strainer. away from ignition sources. If the engine is note: Do not use gasoline containing more than hot from use, shut the engine off and wait 10% ethanol (e10).
  • Page 18 air Filter element maintenance 1. Remove the air filter cover and the • For foam filter elements: air filter elements and check for dirt. Wash the element in warm water and Clean or replace as described below. mild detergent several times. Rinse. Squeeze out excess water and allow it to dry 2.
  • Page 19 Storage When the equipment is to remain idle for longer than d. Open the fuel valve. After all fuel has 20 days, prepare the engine for storage as follows: drained, reinstall the drain bolt and sediment cup (if equipped). Tighten securely. 1.

  • Page 20: Troubleshooting

    troubleshooting problem possible Causes probable Solutions Engine will not start FUEL RELATED: FUEL RELATED: 1. No fuel in tank or fuel valve closed. 1. Fill fuel tank and open fuel valve. 2. Choke not in CHOKE position, cold engine. 2. Move Choke to CHOKE position. 3.
  • Page 21 problem possible Causes probable Solutions Engine stops 1. Low oil shutdown. 1. Fill engine oil to proper level. Check suddenly engine oil before EVERY use. 2. Fuel tank empty or full of impure or low quality 2. Fill fuel tank with fresh 87+ octane gasoline.

  • Page 22: Warranties

    Warranties limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
  • Page 23 harbor Freight tools emission Control Defects Coverage exclusions Warranty Coverage Warranty claims shall be filed in accordance with the provisions of the HFT warranty policy explained in the box at the top of the Engines are warranted for a period of two (2) years relative to previous page.

  • Page 24: Parts Lists And Diagrams

    parts lists and Diagrams pleaSe ReaD the FOllOWinG CaReFullY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

  • Page 25: General Assembly Diagram

    General assembly Diagram ITEM 69734 / 69737 For technical questions, please call 1-800-520-0882. Page 25...

  • Page 26: Pump Parts List

    pump parts list part Description part Description Screw M8x16 Valve Spring Flange O-Ring O-Ring 80x2,4 Siphon Body Radial Shaft Seal Outlet Connector Real Bearing Backup Ring Sheath O-Ring Wobble Plate Valve Core Front Bearing Pump Manifold Spring Disk Seal Gasket 15Mm Plunger Water Inlet Body Plunger Spring...

  • Page 27: Pump Assembly Diagram

    pump assembly Diagram ITEM 69734 / 69737 For technical questions, please call 1-800-520-0882. Page 27...
  • Page 28 item 69734 engine parts list part Description part Description Gasket, Cylinder Head Valve Adjusting Nut Cover Subassembly, Cylinder Head Nut, Valve Lock Gasket, Cylinder Head Cover Spring, Valve Tube, Breather Starter Assy, Recoil Bolt Bolt Stud Shroud Stud Shroud, Cylinder Body Stud Shield,Lower Protector, Oil...

  • Page 29: Item 69734 Engine Assembly Diagram

    item 69734 engine assembly Diagram ITEM 69734 / 69737 For technical questions, please call 1-800-520-0882. Page 29...
  • Page 30 item 69737 engine parts list part Description part Description Gasket, Cylinder Head Shroud Cover Subassembly, Cylinder Head Shroud, Cylinder Body Gasket, Cylinder Head Cover Shield,Lower Tube, Breather Protector, Oil Bolt Switch Subassembly, Stop Engine Stud Bolt Stud Bolt Stud Collar Bolt Bolt, Cylinder Head Bolt...
  • Page 31 item 69737 engine assembly Diagram ITEM 69734 / 69737 For technical questions, please call 1-800-520-0882. Page 31...
  • Page 32 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 520-0882...

This manual is also suitable for:

6973469737

Table of Contents

Save PDF