Service Interval Chart; Premaintenance Procedures; Removing The Hood; Removing The Battery Cover - Toro 03910 Operator's Manual

Service Interval Chart

Premaintenance
Procedures

Removing the Hood

The hood may be easily removed to ease maintenance
procedures in the engine area of the machine.
1. Unlatch and raise the hood.
2. Remove the hairpin cotter securing the hood pivot to
the mounting brackets
1. Hairpin cotter
3. Slide the hood to the right side, lift the other side, and
pull it out of the brackets.
Note: Reverse the procedure to install the hood.
(Figure 42).
Figure 42
Figure 41

Removing the Battery Cover

Loosen the knobs and remove the battery cover
Note: Refer to
Servicing for the Battery (page 39)
information.
1. Battery cover
34
(Figure
Figure 43
43).
for more