Cooling System Maintenance; Cleaning The Engine Cooling System - Toro 03910 Operator's Manual

5. Tighten the locknut securing the adjustment.
6. Stop the engine.
7. Remove the support blocks and lower the machine to
the shop floor. Test drive the machine to make sure that
it does not move when the traction pedal is in neutral.
Cooling System
Maintenance
Cleaning the Engine Cooling
System
Service Interval: Before each use or daily
Remove debris from the radiator/oil cooler daily. Clean them
more frequently in dirty conditions.
1. Turn the engine off and raise the hood. Clean the
engine area thoroughly of all debris.
2. Clean both sides of the radiator/oil cooler thoroughly
with compressed air
1. Radiator/oil cooler
3. Close the hood.
41
(Figure 59).
Figure 59