If the vehicle speed reaches zero during this period, the time and distance counts are
reset and start again from zero when the vehicle starts moving once again.
Switching on the opposite side turn indicators without pressing the switch in the in-
termediate reset position causes both the time and distance counters to reset and
recommence from zero.
High/low beam selector (02_49)
The high beams are switched on with the light switches located at the centre.
Press the light switch to the right, to turn on the high beam light;
02_49
Passing button (02_50)
Uses the high beam flash in case of danger or emergency.
Releasing the switch deactivates the high beam flash.
02_50
52