Lamps - APRILIA CAPONORD Manual

B - Permanent ECU ABS positive (20 A).
C - Electrical socket, heated handgrips (if installed), anti-theft, GPS power supply (7.5
A)
NOTE
THREE FUSES (D) ARE SPARE FUSES

Lamps

CAUTION
BEFORE REPLACING A BULB, TURN THE IGNITION SWITCH TO «KEY OFF»
AND WAIT A FEW MINUTES FOR THE BULB TO COOL OFF.
WEAR CLEAN GLOVES OR USE A CLEAN DRY CLOTH TO REPLACE THE
BULB.
DO NOT LEAVE PRINTS ON THE BULB AS THIS MAY CAUSE IT TO OVERHEAT
OR EVEN BLOW OUT. IF YOU TOUCH THE BULB WITHOUT WEARING GLOVES,
CLEAN OFF PRINTS WITH ALCOHOL TO AVOID DAMAGING THE BULB.
DO NOT FORCE ELECTRICAL CABLES.
BULB LAYOUT
In the headlamp there are:
- two tail light bulbs (side)
- two low beam light bulbs (side);
- a high beam light bulb (central);
128