High/low beam selector
(02_20)
If the light switch «2» is set to the upper
position, this activates the high-beam
light; if it is set to the lower position, the
low-beam light is switched on. In case of
danger and/or emergency it is possible to
activate high-beam flashing using the
«1» button.
02_20
Start-up button (02_21)
By pressing the starter button «2», the
starter motor makes the engine rotate.
02_21
Lichtschakelaar (02_20)
Wanneer de omleider van de lichten «2»
zich in de bovenste positie bevindt, wordt
het groot licht geactiveerd; wanneer hij
zich in de onderste positie bevindt, wordt
het dimlicht geactiveerd. Met drukknop
«1» is het mogelijk om het knipperen van
het groot licht te activeren in geval van
gevaar of nood.
Startknop (02_21)
Door op drukknop «2» te drukken, doet
het startmotortje de motor draaien.
37