APRILIA CAPONORD Manual page 45

NOTE
ONCE THE WORD CALIBRATION DISAPPEARS FROM THE DISPLAY, TO COM-
PLETE THE CALIBRATION PROCEDURE, STOP THE VEHICLE AND SHUT OFF
THE PANEL FOR AT LEAST 30 SECONDS.
THIS ALLOWS THE CALIBRATION TO BE STORED IN THE MEMORY.
NOTE
CARRY OUT THE CALIBRATION EACH TIME TYRES TYPE OR DRIVE GEAR-
MODE IS CHANGED.
NOTE
TURN THE IGNITION SWITCH OFF TO ABORT THE CALIBRATION PROCE-
DURE.
DURING CALIBRATION, ATC IS AUTOMATICALLY DEACTIVATED (IF PREVI-
OUSLY ACTIVATED).
BACKLIGHTING
To modify the intensity of the digital display's backlighting, hold button "B" pressed for
a few seconds, to access the adjustments screen page.
02_38
Whenever button "A" is briefly pressed,, backlighting intensity (indicated by a number
on the digital display) increases up to a maximum of 5 levels.
The function is cyclical, which means that once the maximum value is reached, if
button "A" is pressed again, the backlighting will restart from the minimum value.
45