APRILIA CAPONORD Manual page 56

Once the desired speed is reached, the system may be activated (SET state) by
pressing the cruise control button briefly, provided that the following conditions are
met:
- The engaged gear must not be lower than third and cannot be neutral:
- The brakes must not be applied:
- The clutch lever must not be in use:
The instrument panel indicator lamp lights continuously to indicate that the system is
active.
02_56
The throttle grip may now be released, and the cruise control function will autono-
mously maintain the selected speed.
The accelerator can be used to temporarily increase speed, up to a maximum 30 km/
h (18.64 mi) more than the selected speed, without deactivating the system (e.g.
overtake).
If the speed is increased by more than 30 km/h (18.64 mi), the system will be deacti-
vated (status changes from SET to ON).
When throttle is released, the motorcycle will return to the selected cruising speed. By
exceeding the maximum threshold set for each gear in the previous table, the system
will be deactivated (status changes from SET to ON).
Besides, the system deactivates (going from SET to ON status, flashing warning light)
in the event of one of the following conditions:
- Engaging the clutch;
- Engaging the front/rear brake;
- Downshifting to gear 3 or putting the gearbox in neutral;
- Press the Cruise Control button with a short press;
56